Here's How to Set Clutch Manual And Hydraulic
How to Set Clutch Manual And Hydraulics - Stuck road conditions often make car users with manual transmissions complain. The left leg feels stiff from having to step on the clutch while switching the transmission gear repeatedly. Especially if the clutch pedal settings do not fit, the legs must be getting sore. If the pedal is too high, then the foot will be heavier to keep it. But if too low, gears also not maximal shift. For that clutch pedal need to be adjusted to be comfortable when stepped on and not make legs.
Setting the clutch can actually be done at home either a manual type that is still using a cable or hydraulic type. But you must be able to distinguish the two. Because even though the two are easy to do, have a slightly different way. If you already know the difference, let's see the steps below:
How To Set Clutch Manual And Hydraulics
First of all after the distance of the clutch pedal to your liking. For manual clutch users like the Toyota Avanza then you can rotate the setter bolt located in the gearbox section. Rotate left to increase pedal height and vice versa. Meanwhile for a hydraulic type like toyota inova, you have to work extra. Because setting are under the wheel so you have to help first. Find the master pin lever. Loosen to the left to reduce or turn right to increase pedal height.
Especially for the hydraulic clutch, the clutch pedal will have a spongeng when reducing the distance of the main pedal clutch. Well to overcome this simply turn the bolt setting using a 14 mm key. And keep in mind when you've finished adjusting the distance of the hydraulic clutch pedal then it is possible the clutch pedal is not parallel to the brake pedal. This is natural, so you do not need to panic.
How easy is this manual and hydraulic clutch setup? So, if your legs have started to ache because of the high pedal is not normal alone at home alone. You can save more because it does not incur costs. Good luck yes, good luck.
Komentar
Posting Komentar